500 / 51X to DBX 900 series adaptor Kit. Allows 500 or 51X series modules to plug into DBX900 series racks
Please note
- The 2 mounting holes on 900 series racks are slightly different spacing to 500 / 51X series so holes in 500 module may need to be made slightly larger.
- The gap between the top and bottom mounting surface is 116mm so some 500 module brackets may touch requiring some trimming to 500 module or 900 rack.
500 / 51X to DBX 900 series adaptor Kit parts
- 1 x 900 series edge PCB
- 1 x Front 500 series PCB
- 2 x Support PCBs
- 1 x 15 pin edge connector
Optional 24v to 48v for inverter for phantom power for 500 / 51X series mic pres
The 48v inverter on one adaptor can be wired to supply 48v power for other adaptors in the same 900 series rack.
- 24v to 48vdc SMPS module
- 2 x 100uF 50v
- 2 x 10uF 63v
- 3 x 10R