FREQ500 is a very powerful 500 module with fully variable 5 BAND + HPF active EQ. EQ that sounds natural.
We can supply this EQ as a 51X version. If you want 51X version please mention this in the comments section when checking out.
EQ circuit is a sidechain feed-forward equalizer so has an extremely low noise floor even at full boost.
All pairs ordered in one order will be stereo matched for free.
Features for FREQ500
- All 5 BANDS have 12dB boost and pull for 12dB cut.
- Dual colour led with Green to show boost and red to show cut.
- Each of the 5 bands has a internal jumper to change between 12dB or 6dB maximum boost/cut.
- HIGH Shelf Frequency sweepable from 2k to 20k @ 6dB per octave. Pull frequency pot for 12dB per octave and orange led on.
- HI MID Frequency sweepable from 2k to 20k @ BW of 2 octaves. Pull frequency pot for BW of 1 octave and orange led on.
- MID Frequency sweepable from 400 to 4k @ BW of 2 octaves. Pull frequency pot for BW of 1 octave and orange led on.
- LO Mid Frequency sweepable from 100 to 1k @ BW of 2 octaves. Pull frequency pot for BW of 1 octave and orange led on.
- LOW Shelf Frequency sweepable from 20 to 200Hz @ 6dB per octave. Pull frequency pot for 12dB per octave and orange led on.
- HPF Frequency sweepable from 20 to 200Hz @ 6dB per octave. Pull frequency pot for 12dB per octave and orange led on.
- EQ in / out toggle switch with blue LED
- HPF in / out toggle switch with yellow LED
- Electronic Balanced input and out.
- All pots dual 10k linear with electronic log circuit for best stereo matching.
- All pots have DPDT pull switch built in.
- Double sided Gold plated rear edge connector.
Specifications for FREQ500
- Frequency Response +/-0.5dB 5Hz to 70Khz, +/-3dB 2Hz to 200khz.
- 20k input impedance.
- +28dBu Max output level into 600ohm load.
- THD = 0.0015% (mostly 2nd harmonic).
- Current draw @ +/-16v 130mA.
