Variable PAD PCB used on the Variable input pad kit, plugs into the DI socket on the Go Between kit or GO Between PLUS kit to give a 25dB variable pad. The 20dB fixed pad switch on the GO Between or GO between PLUS kit still functions so up to 45dB of attenuation can be achieved. A JLM Fet DI or JLM OPA DI can still be added easily and it plugs into the second 10pin socket on the Variable Pad PCB.
This kit when used with the GO between kit is great for giving controllable gain to old modules like AM16, etc that have a high fixed gain.
Variable Pad Kit Parts List
- 1 x Variable Pad PCB
- 1 x Dual 1k log pot
- 1 x 100R resistor
- 2 x 10-pin IDC PCB header
- 2 x 10-pin IDC cable plug & clamp
- 1 x 200mm Ribbon Cable
- 2 x Jumper shunts
You can save money on this item when you purchase several at a time. The table below shows the minimum quantities required to benefit from this offer, and how much they'll cost.
| Quantity | Price per unit |
|---|
| 1 | $7.15AUD |
| 4+ | $6.60AUD |
| 8+ | $6.05AUD |
